Detecto 8430S Instructions d'exploitation télécharger pdf (Page 7)

OPERATION, CONT.

Basic Operation with ID – (No BMI)

To Weigh

1. Press ON/OFF key to turn indicator on.

2. Press ZERO key to zero weight display. ZERO, GROSS and lb, oz, kg or ST

annunciator will turn on to show scale is ready for use.

3. Press ID/HEIGHT key.

4. Display will change to show

id=

5. Using numeric keys, key-in up to an 11 digit identification number.

6. Press PRINT/ENTER key.

7. Place patient on scale

8. Read weight display.

9. If a printer is connected to scale, press PRINT/ENTER key to print a ticket.

10. Remove patient from scale.

Body Mass Index (BMI) Operation – (No ID)

To Weigh and Calculate BMI

1. Press ON/OFF key to turn indicator on.

2. Press ZERO key to zero weight display. ZERO, GROSS and lb, oz, kg or ST

annunciator will turn on to show scale is ready for use.

3. Perform tare operation if required. Refer to Push Button Tare or Tare Weight Entry in

previous section for instructions on using tare.

4. Place patient on the scale and then press ID/HEIGHT key.

5. If Feet-Inches were selected in setup for height measurement, display will change to

show

FEEt=

a. Use numeric keys to enter 1 digit for height in feet, then press PRINT/ENTER key.

b. Display will change to show

inCH=

c. Use numeric keys to enter up to 3 digits (# # . #) for height in inches and then

press PRINT/ENTER key or press PRINT/ENTER key if no inches are required.

6. If Centimeters was selected in setup for height measurement, display will change to

show

Cn=_

a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and

then press PRINT/ENTER key.

7. Read weight and BMI displays.

8. If a printer is connected to scale, press PRINT/ENTER key to print a ticket.

9. Remove patient from scale.

8525-M041-O1 Rev K x 8430 Series

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Detecto 8430S Instructions d'exploitation Page 7