Detecto PS-11 Manuel du propriétaire Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
5
CONFIGURATION, Cont.
To select “g” (gram) weighing units:
1. With the display showing (1.< , press the ZERO key and then UNIT key 3 times. The
display will change to show “g”.
2. Press ZERO key to display g (gram) status.
3. Press the UNIT key to toggle between:
Enable (display will change to $1 ) or
Disable (display will change to $ ).
4. Press the ZERO key and then the UNIT key 2 times. The display will change to (1.< .
5. Proceed to AUTOMATIC SHUTOFF.
To select “lb” (pounds only) weighing units:
6. With the display showing (1.< , press the ZERO key and then UNIT key 4 times. The
display will change to show “lb”.
7. Press ZERO key to display lb status.
8. Press the UNIT key to toggle between:
Enable (display will change to $1 ) or
Disable (display will change to $ ).
9. Press the ZERO key and then the UNIT key. The display will change to (1.< .
10. Proceed to AUTOMATIC SHUTOFF.
AUTOMATIC SHUTOFF
1. With the display showing (1.< , press the press UNIT key. The display will change to
show $ .
2. Press the ZERO key to begin selection of the automatic shut-off time (in seconds). The
display will change to show  .
3. Press the UNIT key to toggle through the selections, , , , , or $.
4. When the desired time is displayed, press the ZERO key. The display will change to show
$ .
5. Proceed to GRAVITY COMPENSATION.
GRAVITY COMPENSATION
1. With the display showing $66 , press the press UNIT key. The display will change to
show &( .
2. With the display showing := :
To Enable the Gravity Compensation mode, press the UNIT key. The display will
change to $1 .
To Disable the Gravity Compensation mode, press the UNIT key The display will
change to $ .
3. Press the ZERO key again. The display will change to show := .
4. Press the UNIT key. The display will change to show 14 .
5. Press the ZERO key to save the settings and reset the scale.
6. Setup is complete.
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire