Detecto 210 Spécifications télécharger pdf (Page 36)

8200-M411-O1 Rev D y 210/215 Installation & Technical 32

SETUP AND CALIBRATION, CONT.

*-6 (*-6) - Serial Input/Output

With *-6 (*-6) displayed, press the ENTER key. The display will change to show the

current setting 06. To skip configuring the *-6 (serial input/output) and proceed to the

$9-0; menu, press the ENTER key again. To configure the *-6, press the numeric key

1/YES (display will change to (*) and then press the ENTER key. After pressing the ENTER

key, the display will change to 2<3>.

2'3> (Serial Port Baud Rate)

Press the ENTER key to show the current value. If the setting displayed is acceptable, press

the ENTER key again to save it. Otherwise, use the numeric keys to enter a new baud rate for

the serial ports, then press the ENTER key to save it. Allowable values are:

12 = 1200 Baud 24 = 2400 Baud 48 = 4800 Baud

96 = 9600 Baud 19 = 19.2k Baud 38 = 38.4k Baud

76 = 76.8k Baud

$9;=> (Serial Port Parity)

Press the ENTER key to show the current value. If the setting displayed is acceptable, press

the ENTER key again to save it. Otherwise, using the numeric keys enter the new setting,

then press the ENTER key to save it. Allowable values are: 0, 1, or 2.

0 = NONE (No Parity) 1 = Odd Parity 2 = Even Parity

2-;*> (Serial Port Data Bits)

Press the ENTER key to show the current value. If the setting displayed is acceptable, press

the ENTER key again to save it. Otherwise, using the numeric keys enter the new setting,

then press the ENTER key to save it. Allowable values are: 7 or 8.

*;6$> (Serial Port Stop Bits)

Press the ENTER key to show the current value. If the setting displayed is acceptable, press

the ENTER key again to save it. Otherwise, using the numeric keys enter the new setting,

then press the ENTER key to save it. Allowable values are: 1 or 2.

60;> (Continuous Output Serial Port 1)

Press the ENTER key to show the current value. If the setting displayed is acceptable, press

the ENTER key again to save it. Otherwise, using the numeric keys, 0/NO or 1/YES, ent

er the

new setting, then press the ENTER key to save it.

60;>`(* 60;>`06

Continuous Output No Continuous Output

If 60;>`(* (Continuous Output) is selected, an additional prompt, ;($>

will be displayed.

If 60;>`06 (No Continuous Output) is selected, proceed to the Weight On

Demand section.

;=$> (Continuous Output Format)

Press the ENTER key to show the current value. If the setting displayed is acceptable, press

the ENTER key again to save it. Otherwise, using the numeric keys enter the new setting,

then press the ENTER key to save it. Allowable values are:

0 = SMA 3 = Rice Lake IQ355 6 = Number

1 = SB-400 4 = AnDFV 7 = Toledo Short

2 = SB-200 5 = WI110 8 = SB500 with Traffic Light

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 69 70

Commentaires sur ces manuels

Pas de commentaire

Detecto 210 Spécifications Page 36

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Detecto 210