Detecto PD100 Instructions d'exploitation télécharger pdf (Page 7)

FIRMWARE VERSION

From time to time, as improvements are made to Prime products, the firmware controlling the

units is revised. When setting a unit up or troubleshooting it may be necessary to determine the

version number for the firmware installed in your unit. The version numbers begin with 1.0 and

are incremented either by tenths (1.1, 1.2, etc.) for small revisions or by the integer digit (1.0, 2.0,

etc.) for more significant revisions.

To determine the version of the firmware running in your unit, simply hold the calibration push

button in as power is applied to the unit. The revision number is displayed as one second flashes

of the green LED for the integer digit followed by one second flashes of the amber LED for the

fractional digit. Count the number of flashes on each LED to determine the revision number.

Thus one flash of the green followed by two flashes of the amber LED indicates version 1.2 of the

firmware.

POWER REQUIREMENTS

95 to 130 volts, 50/60 Hz at 50 mA.

OUTPUT RELAY SPECIFICATIONS

Maximum switched voltage: 380VAC

Maximum switched current: 14 amps N.O., 5 amps N.C, AC resistive,

8 amps DC

Maximum switched power: 20OW DC, 2,OOOVA AC.

Minimum required contact load: 12V, 100 mA

Expected mechanical life: 20 million operations

Expected electrical life: 100,000 operations at 8 amps, 240VAC

50,000 operations at 14 amps N.O., 5 amps N.C.,

120VAC resistive

30,000 operations at 7.2FLA, 45LRA, 120VAC

10,000 operations at 5FLA, 30 LRA, 240VAC

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Detecto PD100 Instructions d'exploitation Page 7